miércoles, 29 de mayo de 2013

Details for Second Sol Teams | Metaverse Sailing


Details for Second Sol Teams

Second Sol 2013

2013 Second Sol Regatta

A Sail4Life Race Event
June 14-23, 2013

THE RACES
There will be two rounds of Qualifying Races. Round One will be held on June 15, and Round Two will be held on June 22.
The full competition fleet will be divided into timeslot groups for the qualifying races. If there are 16 boats, there will be four timeslots; if there are 20 boats there will be five (Four boats in each group). Each race team will be assigned to the same timeslot for both rounds. The winner of each timeslot group will advance to a Finals series on June 23.
Timeslot Races:
Each timeslot race will consist of four heats on a short course that should take 8-12 minutes to complete. The races will be hosted by several different clubs and marine estates in Second Life. The race course and wind settings will be determined by the host Race Director. These will be posted several days in advance of the qualifying rounds.
Finals Event:
The winners of the timeslot group qualifying races will all advanced to a Finals series that would be held in North sea on June 23. The details of the finals event will be announced separately.
THE BOAT
Teams will race a pre-release version of the Trudeau Patchogue II.
The boats will have individual Race ID numbers printed on the sails, so please use that number as your “Race ID,” and do not alter the sail textures.
The Race ID is not your Channel number. You may use any channel number you prefer (including your Race ID)
Some specific details:
– Simple landmark setters (such as TRAPNAV) that show race mark locations as ‘world map teleport points,’ are allowed. Anything more complicated that shows boat position or gives additional numerical data is not allowed.
– The use of simple ‘stop-watch’ timers is allowed.
SAIL TEAMS
Boats competing in the regatta will be registered to a “sailing team” that includes one or more people (yes, one person can be a ‘Team.”).
For any particular race, the boat’s team will decide which team members should crew, and which will skipper. (The minimum number aboard a race boat is a solo skipper; the maximum number is one skipper plus three crew).
Even in the middle of a race, a team can decide to add or remove crew, or switch skippers.
The number of crew aboard any boat at the START can be different from the number of crew crossing the FINISH line.
A sailor can be a skipper in only one timeslot on June 15 and 22, but any sailor can crew for any team in timeslots where they are not the skipper. (In other words, a sailor can skipper in the 9:00 timeslot but still crew for other teams in the 12:00 and 18:00 timeslots).
Each competing race boat must use a unique ID pre-printed on the boat’s sails and registered to the boat’s team. That ID should be loaded into the boat by the team so the boat will trigger the raceline.
All competing boats will use the Race Wind provided by the Start line windsetter (WWC Cruise Wind).
CRASHES
If a skipper crashes during a race, another team member can take the helm and continue sailing. The owner can also rez a new boat if needed. However, the new boat should rez at the nearest point to the crash site. The judges may call a penalty if they rule the new rez site is inappropriately far ahead of the crash.
PHANTOM OBSTRUCTIONS
A collision only occurs when a non-phantom part of the boat strikes another non-phantom object. The Patchogue II has phantom sails, but the mast and boom are physical.
SCORING
The Qualifying Timeslot Races will use the ISAF Appendix A Standard Low Point scoring system. Four races will be held in each timeslot on June 15, and the timeslots will be repeated on June 22. That gives each team the opportunity to race a total eight qualifying heats. NOTE: Teams will get four discards. 
The final score will be determined by adding the best four results for each boat (after eliminating the four discards).
ISAF Appendix A 8.1 and 8.2 will be used to resolve any ties.
The boats with the lowest scores in each timeslot will then advance to the Finals Round. (Please note: If there are only four qualifying timeslots, and the results show one timeslot where two boats have an identical score, the Race Committee may decide to advance both tied boats to the Finals).
RULES AND REGS
ISAF Rules
The ISAF Race Rules will apply unless otherwise noted.
Please help us make sure the ‘rules’ are understood by all, and the judging and protest review is uniform, valid, and consistent.
Additional Rules Specific for Second Sol. :-)
Note: Rule exceptions and SL-specific additions will be listed in the SECOND SOL thread on SLSailing.net and also published in-world.
Judges will use a two boat-length zone to resolve Rule 18 protests over ROW at racemarks. Rule 18 does not apply at start line marks, but will apply at the marks that define a GATE, except as stated in Rule 18.4.
Rule 30.1 will be enforced:
“…(if) any part of a boat’s hull, crew or equipment is on the course side of the starting line or one of its  extensions during the last minute before her starting signal, she shall thereafter sail from the course side across an extension to the prestart side before starting.”
Rule 31 will also be enforced:
“31 TOUCHING A MARK  While racing, a boat shall not touch a starting mark before starting, a mark that begins, bounds or ends the leg of the course on which she is sailing, or a finishing mark after finishing.”
JUDGING GUIDELINES:
SPORTSMANSHIP
Sportsmanship is a fundamental rule of sailing. the race committee will work hard to ensure a fair and orderly competition. Please follow the general guidelines below to register and resolve protests during the competition in a way that that respects the skill and pride of the many sailors participating in this event.
Please note: it is not appropriate for any racer to argue with the crew of another boat or argue with the Regatta staff except as outlined below. Any sailor who use defamatory language toward other sailors or makes inappropriate derogatory comments about the judging decisions will be given a warning. Any member of the race staff has the right to issue such a warning.
If a team receives a warning during a particular heat but continues to act inappropriately, then the judges can vote at any time to DSQ the boat from that particular heat for “unsportsmanlike conduct.” If a team continues to act inappropriately following such a DSQ, the judges can vote to DSQ that team from the entire regatta.
As discussed in more detail below, any team has the right to appeal a protest decision if they think the decision is in error under the RRS. They can also appeal a DSQ for unsportsmanlike conduct, but they must do so in an appropriate manner that is respectful of the sport of sailing and their fellow sailors.
PROTESTS
As soon as practical after an event occurs, the protesting boat should shout “PROTEST XXX” in open chat, where XXX is the name of the offending boat. The protestor should also announce it over the SECOND SOL Group Chat (or SLSA Group Chat if the other fails) to ensure the protest was heard. A Race Judge will acknowledge receipt of the protest.
An offending boat that accepts a protest from another boat or Judge shall acknowledge the acceptance of the foul by sailing clear of other boats and doingone 360 degree circle turn (two gybes) as soon as reasonably possible, and clear of the competition fleet.
A boat who does not accept a protest can settle the protest following the race with a protest hearing.
In either case, the crew of the protested boat must reply to the protest by shouting Accept or Deny in local chat and over the Group Chat channel as soon as practical after the protest is made.
At the conclusion of a race the RD and the #1 Judge should be the first people to speak to the finished boats once they are collected at the raceline. The staff may use local chat or group chat, whichever is most appropriate. The #1 Judge should ask: “Is there any protest?” and each skipper should reply “YES” or “NO.” If any skipper says YES, the #1 Judge is the ONLY race officer who should speak to the involved race teams about the protested event until that matter is resolved.
The #1 judge should collect standard information (in public chat or group channel) from the boat making the protest (“What protest? What Rule? Against which boat? What Circumstances?“). The #1 judge will then get the alleged offending boat’s response to the protest claim (again in public chat).
Please note: One sailor aboard the boat, preferably the skipper, should speak for each boat.
The Judges and umpires (and any others they chose to involve) then confer in private.
If the Protest Committee is in full agreement regarding a protest and penalty, the #1 judge will then announce the decision to the sailors and the observers in public chat. (For example: “Protest by Team Fossett sailing 82JF is DENIED. NO PENALTY.”)
The judge should then immediately go on to consider the next Protest or shout“NEXT RACE!” and turn management back over to the Race Director.
If a team thinks the Protest Committee made an error, the team should ask for an APPEAL. If the Protest Committee itself fails to reach a unanimous decision, they too should ask for an APPEAL.
The regatta should then continue, and the Appeals Judge(s) will render a final decision at the end of that qualifying timeslot series.
The Appeals Judge(s) will be the members of the Race Committee who were present for the race in question. They may involve other members of the Timeslot Race staff (such as the RD) in their discussions.


Details for Second Sol Teams | Metaverse Sailing

PLAY OF THE DAY Berntsson v Canfield Qualifying Flight 20 M2 - Match Race Germany 2013



PLAY OF THE DAY Berntsson v Canfield Qualifying Flight 20 M2 - Match Race Germany 2013


Onboard race edit of Berntsson and Canfield's penalty strewn Qualifying round match.
Follow all the action on www.wmrt.com - 2013 © AlpariWorld Match Racing Tour

So exciting Match Racing Lesson at Korea Match Cup 2013!
Wo0OT!!!

Flying from Mt. Everest - The Mission - World Record BASE Jump



Watch the Action Clip: http://youtu.be/uAfYbzL90Mo
Nearly 60 years to the day after the first ascent up Mount Everest, Russian extreme sport star Valery Rozov (48) flew off the north face of Mount Everest - the world's highest BASE jump ever - 7220 meters (23,688ft) above sea level.

The ascent began on the Chinese side on the famous north route. It took him four days to climb from the base camp to the jumping location. At precisely 2:30 p.m. local time he leaped despite adverse weather conditions with temperatures -18 Celsius. 

Because the cliff at the top was not very high, the initial moments of the leap in the rarified high altitude air were the most critical phase. Rozov needed more time than usual in the thin air to transition from freefall to flying. After that he flew for nearly a full minute at speeds of about 200 km/h (125 mph) along the north face before he landed safely on the Rongbuk glacier - at an altitude of 5,950 meters.

"Only when I got back home did I see how hard it was for me both physically and psychologically," said Rozov after getting home to Moscow. "When you look at the videos you realize that it took a lot longer than usual to get from falling to flying."

http://redbull.com
________________________________________­_____________

Experience the world of Red Bull like you have never seen it before. With the best action sports clips on the web and YouTube exclusive series, prepare for your "stoke factor" to be at an all time high.

Red Bull on Facebook: http://win.gs/redbullfb

Red Bull on Twitter: http://win.gs/redbulltwitter

Subscribe to Red Bull on Youtube:http://www.youtube.com/subscription_c...

Get a FREE SUBSCRIPTION to our magazine here (US only):http://win.gs/ytfree

Flying from Mt. Everest - The Mission - World Record BASE Jump - YouTube

Goleta Josephine | Goleta Josephine, paseos en barco








12 plazas | Travesías de 1 día o semanas | Vacaciones amarrados a puerto... ¡Haznos una propuesta y la estudiamos!













Goleta Josephine | Goleta Josephine, paseos en barco

Three Weeks to Second Sol! | Metaverse Sailing


Three Weeks to Second Sol!

Sec Sol Poster 5a
The Second Sol Regatta is only three weeks away!
Second Sol is a Sail4Life fundraising regatta that will cover two weekends, from June 15-June 23; you can read all about it here and here. A few days ago the race version of the boat was released, and delivered to fifteen race teams that are already signed up :-) . Here are Team Coordinators for the fleet so far, followed by their assigned race number for the event:
Arrekusu Muromachi 001
pensive missionPhill Plasma 002
lesbo charisma 003
SerenityAeon Resident 004
VitorCr Resident 005
ariel gallais 006
Allie Tomsen 007
EmmanuelMara 008
Ronin Zane 009
Chaos Mandelbrot 010
Sarah Solo 011
Pensive Mission 012
JoyofRLC Acker 013
erickson 014
Alain Gloster 015
moontears vought 016

Please note:

1. Only one race boat goes to each team, but we’ll deploy a demo vendor so all team sailors can practice on the boat.
2. The boats are eached numbered in the order sailors signed up to race; that number will be displayed on the team’s sails. Please use it as your race ID for this regatta!
3. The race ID for each team boat is different from the “Channel ID.” Teams are encouraged to use whatever channel is most convenient for them (other then “Channel 1,” of course).
4. The sails have fixed textures for this event. Each one is preprinted with the team’s assigned race number. When the Patchogue II officially launches, the race boats will be replaced with an official release version that is fully texturizible!
Patch II trials

Please also note:

1. Although we initially planned for a total of only 16 raceboats in four qualifying timeslots on Saturday, June 15 and June 22, the response was impressive and several sailors have asked for an additional Friday time slot. If enough sailors sign up, that time slot will be 12:30 on Friday, June 14 and June 21.
2. That means right now we still have five more slots for race teams that want to sign up! You can join the fleet by signing up here, or you can contact Jane Fossett for more information in Second Life. :-)
SecSol2013 poster 02b

Go SECOND SOL!



Three Weeks to Second Sol! | Metaverse Sailing

sábado, 25 de mayo de 2013

viernes, 24 de mayo de 2013

Sailboards Tarifa - SURF BOARD 5,11- VACUUM EPOXI HOLLOW GLASS.

First board with normal surf foam core, for Autun we will prepare a small serie of surfboards in Eps foam, in ultra light version and strong as ussual. Innegra surfboards will be also in production.


Alboraya en el tiempo.


Puerto fenicio en el barranco del Carraixet (los orígenes)

Puerto fenicio en el barranco del Carraixet (los orígenes)La ocupación humana del territorio en el que se asienta Alboraya nos ha dejado testigos diversos desde hace poco más de 2.000 años, desde época íbera y romana hasta nuestros días. De la época anterior sólo hemos podido conocer cómo ha evolucionado el territorio próximo, ya que hasta ahora no se ha encontrado en lo que hoy es Alboraya testigos de ocupación humana. Aún así, con este horquilla temporal de dos milenios, es mucho más completa la información de la que disponemos sobre los pobladores y su organización a partir de la conquista de la Valencia árabe y la fundación del Reino cristiano de Valencia. Son unos 750 años.
Para conocer cómo vivían los pobladores originarios del territorio, deberemos distinguir a lo largo del presente capítulo entre población y poblamiento en sentido abstracto, y por otra parte entre Alboraya como comunidad. El nacimiento de la comunidad de Alboraya la situaremos a partir del Rey Jaime I y la donación de las alquerías árabes de Alboraya y Almàssera (año 1238) al obispo Vidal de Cañellas de Huesca. Antes es evidente la existencia de los lugares, pero no disponemos de información concreta que nos hable de ellas como a un todo con algún tipo de unidad administrativa. Nos referiremos por lo tanto a la población (habitantes que vivían en el territorio) y el poblamiento (su distribución física a lo largo del territorio).

Entre el barranco del Carraixet y el barranco del Palmar; y al norte del Carraixet hasta el barranquet de Meliana. Ese es el espacio que asignaremos para Alboraya. El límite oriental será el mar, y el occidental, la Vía Augusta o actual carretera de Barcelona. Se trata de un lugar a priori poco amable para vivir por las condiciones que hemos descrito de agua estancada, inundabilidad y la proximidad al mar (corsarios, ataques de los piratas). En este contexto debemos situar la fundación de la ciudad de Valentia en el año 138 a.C.. En los alrededores, la cultura romana había ido sustituyendo a la ibérica, de la que tenemos constancia en la Horta Nord a través de los poblados de los Tos Pelat (entre Montcada y Bétera) o el Puig. Las ciudades ibéricas más importantes en un radio más amplio son Arse (que se corresponde con Sagunt) y Edeta (Llíria), mientras que en la Horta Nord hay restos de inscripciones romanas en Paterna, Carpesa, Godella, Montcada, El Puig o Puçol (Josep Corell). La Vía Augusta comunicaba Valentia y Sagunt y circulaba relativamente alejada del litoral, a unos tres kilómetros en el lugar más próximo. Las poblaciones florecieron a su borde.

En la zona de Orriols, cerca del Monasterio de San Miguel de los Reyes, la arqueóloga Rosa Albiach en el año 1997 excavó un cementerio de época romana, formado por dos edificios funerarios. En él se localizaron diversas inhumaciones, cerámicas, así como varios objetos realizados en oro, hierro, plomo o bronce. La civilización romana situaba los cementerios a las afueras de las villas, y este hecho da idea de que podría tratarse de enterramientos pertenecientes a la ciudad, o de una villa o villas situadas en los alrededores. Desde aquí hay indicios de un camino que partía en dirección al territorio que actualmente ocupa Alboraya (Albiach, 2005).

Un aspecto que nos da idea de la ocupación de la comarca son las centurias del territorio de época romana. Algunos autores como el geógrafo Vicenç M. Rosselló han defendido el origen romano de la Huerta basándose en ellas. Se trata de parcelas o lotes de tierras concedidos a los soldados y sus familias por el pago de los servicios militares. Era el espacio que debían aprovechar cien soldados y tenía una extensión de unas 50 hectáreas.

(Segura Gomis y Roig Hurtado). Están situadas cerca de la Vía Augusta y cerca de la acequia de Montcada y a través del parcelario se ha podido averiguar que la red, 2.000 años después, aún conserva una cierta integridad en lo concerniente a las obras de drenaje o los brazos de riego.

En las playas de La Malvarrosa-Cabanyal, existió un lugar de anclaje posiblemente de época fenicia, ya que en los alrededores se ha localizado ánforas que van desde esta época hasta el siglo XV. La desembocadura del Carraixet ofrecía en los barcos facilidades para anclar cerca de la playa y realizar tareas de carga y descarga, ya que la costa tiene poco desnivel (Segura Gomis y Roig Hurtado). Los restos encontrados van de época fenicia, griega, púnica, ibérica, etrusca y romana, es decir desde el siglo VII antes de Cristo. El que no sabemos es si aparte de este fondeadero cerca había algún poblado.

Otros autores, además, han intentado demostrar que el Carraixet era una vía fluvial remontable hasta Bétera o Montcada, para comerciar con los íberos del Tos Pelat u otros poblados. Lo que queda claro es que la red formada por la Vía Augusta (oeste), el fondeadero (este), las centurias (norte) y el cementerio (sur) nos da una idea que en época romana el territorio de la actual Alboraya o sus alrededores debió de estar habitado.

A partir de esta época se abre un período de silencio histórico sobre Alboraya que llega hasta el siglo XIII. Sí que podemos conocer aspectos de la Huerta, o como era su distribución poblacional en época árabe a partir del Llibre del Repartiment o de Jaime I, donde se detalla la donación de las alquerías árabes. Era de destacar su cantidad, lo que hace pensar en un espacio muy poblado. También ha sobrevivido hasta hoy la toponimia claramente arábiga de algunos espacios. Carme Barceló da los siguientes significados: Alboraya (la torrecilla); Rafelterràs, una antigua alijo de huerta (la finca del broquerer); Massamardà (el hostal o establecimiento de los Mardà). Otros topónimos como Almàssera (molino de aceite); Ruzafa (el jardín); Albalat (el camino) o Mauella (barraca). La palabra acequia significa “que reparte la agua”.


http://www.alboraya.org/basesAyto/home.nsf/VW001/Historia_Puerto_Fenicio?opendocument&sec=Conoce_Alboraya&menu=Menu06&submenu=subMenu06-00&lg=ct


jueves, 23 de mayo de 2013

Want to buy a Pilot Cutter?

Want to buy a Pilot Cutter? – Please share this photo.
Then here is a beauty, Ezra sister ship to Eve of St Mawes and Agnes. Built in 2006 by Luke Powell and has worked as a charter boat in Scotland. Coming to Cornwall end of June so if you interested you can have a good look at her.

Please see the Classic Yacht Brokerage web site http://tinyurl.com/ezra4sale
Facebook

Or choose that virtual one build by Rene Underby at ReneMarine Yacht Building
Home of the great yachts of Rene and Jethro
Linden Ocean yacht marina slip rent rental



*RM* Gaff Rigged Pilot Cutter

The cutter is one of several types of sailboats. Traditionally the sloop rig was a rig with a single mast located forward of 70% of the length of the sailplan. In this traditional definition a sloop could have multiple jibs on a fixed bowsprit.

In the cutter rig, the gaff on the sails aft of the mast is divided between a mainsail below the gaff and a topsail above. This is useful for sailing with small crews as the total sail area is divided into smaller individual sails. These can be managed without the need for large crews, winches, or complex tackles, making the cutter especially suitable for pilot, customs and coast guard duties. For example, a pilot cutter may only have two people on board for its outward trip—the pilot to be delivered to a ship and an assistant who had to sail the cutter back to port single-handed. The cutter sailing rig became so ubiquitous for these tasks that the modern-day motorised vessels now engaged in these duties are known as 'cutters'.

The Pilot Cutter was developed from the need for a fast boat to take Maritime pilots from harbour to incoming large trading vessels. As most early pilots were local fisherman who undertook both jobs, although licensed by the harbour to operate within their jurisdiction, pilots were generally self-employed, and the quickest transport meant greater income. As their fishing boats were heavy working boats, and filled with fishing equipment, they needed a new type of boat.

Early boats were developed from single masted fishing cutter designs and twin masted yawls, and latterly into the specialist pilot cutter. These were effectively light-weight and over powered single masted boats with large steeply angled keels, making them deep draft under power and shallow draft in lighter sail.

In this ReneMarine representation of The Cutter, two passengers are switchable with the pilot. The sails that can be raised and lowered individually provide a reefing capability. A detailed cabin below includes a cuddle pose engine that is integrated into the boat so that it can be sailed with the passengers there.  A new Sail HUD provides visual control of the sails.

The Cutter features the RM Engine and  has many features that add to the SL Sailing experience.  There is a Command line assignable skipper. There are passenger trimmer and steering controls, sail drag penalties, Low Lag, High Performance Luffing Sails. Sail it in Mouseview it looks great! Set the transparency on the sails so you can see where you're going. We've built in autotrim functions to ensure that you have time to relax and explore. There is a dock command so you can dock your boat precisely on your favorite build. A finely crafted Interior with a cuddle pose engine.



Blogroll